- IQ file replay
- Microphone FM transmit with CTCSS
- CTCSS decoder
- Frequency manager (save & load from SD card, with categories and notes)
- File manager
- “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory)
- ADS-B receiver with map view
- ADS-B transmitter (aircraft spoof)
- SSTV transmitter
- Fully configurable jammer
- POCSAG transmitter
- POCSAG receiver/decoder
- Morse transmitter (FM tone and CW)
- OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, …)
- RDS (Radio Data System) PSN, RadioText and Time groups transmitter
- Meteorological radiosonde receiver for M10 and M2K2…
- AFSK receiver
- AFSK transmitter (Bell202…)
- Nuoptix DTMF sync transmitter (quite specific but can be useful in some theme parks 🙂 )
- TouchTunes jukebox universal remote (by Notpike)
- LCR (Language de Commande Routier) message generator
- Street lighting control transmitter (CCIR tones)
- “Play Dead” in case of emergency
- Fully configurable RF signal generator
- RSSI audio output as pitch (for direction finding)
sir ,if you choose the portapack with case ,the hackrf one is not inlcuded ,
if You choose the portapack and hackrf , it is a complete device(hackrf one with portapck and case and antenna)
2019 new PORTAPACK with 0.5ppm TCXO clock FOR HACKRF ONE SDR Software Defined Radio with metal case working from -40 ~ 100
it is in stock now ,we can ship it in 48 hours,
Integrated 0.5ppm TCXO clock
Exclusively write GPS simulator firmware for testing TCXO clocks,Old version hardware does not support
we customize portapack-havoc source,put gpssim baseband signal file in micro sd, through portapack send to air the result is very satisfied!
./gps-sdr-sim -e brdc3540.14n -s 2500000 -b 8 -o gpssim.c8
create text file named “gpssim.txt” context:
and copy this two files into sd card at some dir:
our GPS MODULE got fake gps signal.
Add a PortaPack H1 to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack H1 attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, 0.5ppm clock reference, real-time clock, micro SD card slot, and custom aluminum case.
Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware)All of these CPLD authors use commercial grades from 0°C to 85°C, but we use industrial grades from -40°C to 100°C.
product is in stock now , order from now will ship it in 48 hours even in weekend
more information you can go to this web
According to source code: github.com/sharebrained/portapack-hackrf
Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot,
Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).
- 2.4 inch, 240 x 320 RGB LCD with resistive touch panel.
- Four-way arrow keys, rotary jog wheel, and select button.
- Headphone/microphone jack, compatible with recent Samsung and Apple mobile headsets (possibly others).
- Coin battery for preserving settings and date/time.
- Micro SD card slot for data and code storage
Some features demonstrated in 2016 February 22 firmware video:
- SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.
- Wideband (18MHz) spectrum analysis and waterfall.
- Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).
- HackRF mode runs HackRF firmware for use with host computer SDR software.
- PPM calibration for more accurate tuning.
- Sleep mode saves power by turning off just the display.
You may also find the Furrtek HAVOC firmware very interesting!
Some assembly is required. The assembly steps are documented in the support wiki and videos.
PortaPack does not include a HackRF One. You can buy a HackRF One from my store
Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”.
PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.
PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.
The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.